Voo Virtual
Olá, seja bem-vindo(a) ao Voo Virtual. Caso ainda não seja membro da nossa comunidade, registre-se, para que possa participar ativamente e ter acesso a todos os conteúdos do site.
Por favor leia as regras do fórum aqui antes de postar, para evitar advertências e suspensão.


BRCockpit TQ Gse_multipart13851

BRCockpit TQ

2 participantes

Ir para baixo

Resolvido BRCockpit TQ

Mensagem por owinfrey Sáb 30 Set 2017, 09:17

Hello,

I'm new to the forum and could really use some help with by TQ.

I purchase the BRCockpit used. I've had problems with getting the Axis settings setup correctly.
I'm using P3D v3.4 with about 12 other USB devices.

Problem 1.  MJ16 Must be the first device to start up whenever I reboot my PC or I loss the configuration in P3D Sad

Problem 2.  X Y and Z axises does not have full range even after calibrating in Windows and P3D

Problem 3.  X and Y axises are very erratic and jumpy.

I assume the I/O board pin settings are not setup correctly.

If you have experience these issues, please share the resolution.

Any advice is appreciated.

Thanks

owinfrey
Recruta
Recruta

Masculino
Inscrito em : 30/09/2017
Mensagens : 3
Reputação : 0
Idade : 63
Simulador preferido : FSX, Prepar3d
Nacionalidade : Estados Unidos

Ir para o topo Ir para baixo

Resolvido Re: BRCockpit TQ

Mensagem por MarcoAtSantiago Sáb 30 Set 2017, 10:59

owinfrey escreveu:Hello,

I'm new to the forum and could really use some help with by TQ.

I purchase the BRCockpit used. I've had problems with getting the Axis settings setup correctly.
I'm using P3D v3.4 with about 12 other USB devices.

Problem 1.  MJ16 Must be the first device to start up whenever I reboot my PC or I loss the configuration in P3D Sad

Problem 2.  X Y and Z axises does not have full range even after calibrating in Windows and P3D

Problem 3.  X and Y axises are very erratic and jumpy.

I assume the I/O board pin settings are not setup correctly.

If you have experience these issues, please share the resolution.

Any advice is appreciated.

Thanks

Hi owinfrey,

If you have FSUIPC, remove all axis configurations within FSX / P3D and make all axis configurations in FSUIPC. On the "Axis Assignment" tab and the "Joystick calibration" tab.

I had this problem and solved it that way

I hope it helped you

_________________
https://plus.google.com/+MarcoAntonioSantiago

Não uso, não tenho e não sei nada de ORBx thumbsup
MarcoAtSantiago
MarcoAtSantiago
Tenente-Coronel
Tenente-Coronel

Masculino
Inscrito em : 23/04/2017
Mensagens : 553
Reputação : 63
Idade : 59
Nacionalidade : Brasil

Ir para o topo Ir para baixo

Resolvido Re: BRCockpit TQ

Mensagem por owinfrey Sáb 30 Set 2017, 13:32

Hi Marco, Thank you for your response. I've tried using FSUIPC and the axes are have erratic movement as well. I will try removing everything from P3D native settings and try FSUIPC again.

Thanks!

owinfrey
Recruta
Recruta

Masculino
Inscrito em : 30/09/2017
Mensagens : 3
Reputação : 0
Idade : 63
Simulador preferido : FSX, Prepar3d
Nacionalidade : Estados Unidos

Ir para o topo Ir para baixo

Resolvido Re: BRCockpit TQ

Mensagem por owinfrey Dom 08 Out 2017, 10:28

owinfrey escreveu:Hi Marco, Thank you for your response. I've tried using FSUIPC and the axes are have erratic movement as well. I will try removing everything from P3D native settings and try FSUIPC again.

Thanks!

Hi Macro,

Resolved: The problem was the connector for the wires on the potentiometer to the board. I used a test meter for testing.
This video was very helpful. https://www.youtube.com/watch?v=K_hVALnvAuE

Thanks again for your help.

owinfrey
Recruta
Recruta

Masculino
Inscrito em : 30/09/2017
Mensagens : 3
Reputação : 0
Idade : 63
Simulador preferido : FSX, Prepar3d
Nacionalidade : Estados Unidos

Ir para o topo Ir para baixo

Resolvido Re: BRCockpit TQ

Mensagem por Conteúdo patrocinado


Conteúdo patrocinado


Ir para o topo Ir para baixo

Ir para o topo


 
Permissões neste sub-fórum
Não podes responder a tópicos